废旧镀锡覆铜板表面锡回收及其制备二氧化锡的试验研究

彭准, 伍泽广, 万炜, 刘攀, 雷小康, 梁泽燊. 废旧镀锡覆铜板表面锡回收及其制备二氧化锡的试验研究[J]. 矿产综合利用, 2020, (4): 141-146. doi: 10.3969/j.issn.1000-6532.2020.04.024
引用本文: 彭准, 伍泽广, 万炜, 刘攀, 雷小康, 梁泽燊. 废旧镀锡覆铜板表面锡回收及其制备二氧化锡的试验研究[J]. 矿产综合利用, 2020, (4): 141-146. doi: 10.3969/j.issn.1000-6532.2020.04.024
Peng Zhun, Wu Zeguang, Wan Wei, Liu Pan, Lei Xiaokang, Liang Zeshen. Experimental Study on the Recovery of Tin on the Surface of Scrap Tin-coated Copper Plate and the Preparation of Tin Dioxide[J]. Multipurpose Utilization of Mineral Resources, 2020, (4): 141-146. doi: 10.3969/j.issn.1000-6532.2020.04.024
Citation: Peng Zhun, Wu Zeguang, Wan Wei, Liu Pan, Lei Xiaokang, Liang Zeshen. Experimental Study on the Recovery of Tin on the Surface of Scrap Tin-coated Copper Plate and the Preparation of Tin Dioxide[J]. Multipurpose Utilization of Mineral Resources, 2020, (4): 141-146. doi: 10.3969/j.issn.1000-6532.2020.04.024

废旧镀锡覆铜板表面锡回收及其制备二氧化锡的试验研究

  • 基金项目:

    湖南省大学生研究性学习和创新性实验计划项目

    国家自然科学基金

    湖南省自然科学基金

详细信息
  • 中图分类号: TD989

Experimental Study on the Recovery of Tin on the Surface of Scrap Tin-coated Copper Plate and the Preparation of Tin Dioxide

  • 废旧镀锡覆铜板富含铜、锡等稀贵金属,具有极高的资源化回收利用价值.试验中采用机械剥离预处理+化学法浸出工艺,开展了废旧镀锡覆铜板表面锡的回收及其制备二氧化锡的研究;发现浸出液浓度、液固比、温度、时间等浸出工艺参数会影响锡的浸出回收率,氧化剂H2O2、焙烧工艺等会影响制备二氧化锡效果.结果表明,在液固比为4 mL/g、硫酸浓度为80 mL/L、硫酸铜与镀锡铜箔质量比为1:10的工艺条件下,表面锡浸出回收率达到92.13%;按照H2O2与Sn2+摩尔比1.5:1、温度55℃、时间30 min工艺条件制得二氧化锡前驱物Sn(OH)4,经550℃焙烧120 min后得到半结晶态二氧化锡的纯度达到99.21%.
  • 加载中
  • 加载中
计量
  • 文章访问数:  393
  • PDF下载数:  104
  • 施引文献:  0
出版历程
刊出日期:  2020-08-01

目录