COMPREHENSIVE TESTS AND APPLIED STUDIES OF HYDRAULIC FRACTURING IN THE ROCK MASS OF THE YANGJIANG PUMPING STORAGE POWER STATION
-
摘要:
阳江抽水蓄能电站的输水隧洞围岩承受最大静内水压力高达7.83MPa, 因此原地应力状态、围岩自身承载能力及高压透水性状等对工程的科学设计不可或缺。测量结果表明, 工程区现今地壳应力场的总体特征为:水平主应力为最大主应力, 最大水平主应力的优势方向为NW-NWW向; 厂房和高压岔管区围岩的最大主应力值一般为14.5±0.5MPa, 最小主应力值一般为9±0.5MPa; 围岩自身的抗载强度一般为10~14MPa; 在8~10MPa高压力作用下围岩基本不透水。洞室围岩物理力学参数的这些测试成果, 为工程的科学设计提供了可靠依据。
Abstract:The surrounding rocks of the water tunnel of the Yangjiang pumping storage power plant are required to bear a maximum static pressure of 7.83 MPa; therefore, the state of in-situ stress, dead loadbearing capacity of surrounding rocks and high-pressure permeability are all essential data for the scientific design of the project.The measurement results show that the general characteristics of the present crustal stress field of the project area are as follows:the horizontal principal stress is the maximum principal stress, and the preferred orientation of the maximum horizontal principal stress is NW-WNW, the maximum principal stress of surrounding rocks of the plant buildings and high-pressure branch tunnel area is generally 14.5±0.5 MPa and the minimum principal stress is 9±0.5 MPa; the dead load-bearing capacity of surrounding rocks is 10-14 MPa; and the surrounding rocks are essentially impermeable at high pressures of 8-10 MPa.The results of those measurements of physical-mechanical parameters of surrounding rocks offer a reliable basis for the scientific design of the project.
-
-
表 1 Zky001孔水压致裂应力测量结果一览表
Table 1. Summary of hydraulic fracturing stress measurements of borehole Zky001
下载: 导出CSV
表 3 岩体原地承载力的测量结果
Table 3. Measurements of in-situ load-bearing capabilities of rock masses
下载: 导出CSV
-
[1] Hubert MD, Wills DG. Mechanics of hydrauli c f racturing. Trans. AIME210, 1957.
[2] Hi ckman SH, Zoback M D. The interpretation of hydrauli c f racturing pressure-time data for in-situ st ress determination, In : Zoback MD. Haimson BC (eds. ), Proc. Hydraulic Fracturing St ress Measurement s Workshop. Washington, DC : National Academy Press, 1983, 44~54.
[3] 郭良, 安其美, 赵仕广, 等. 浅谈水压致裂应力测量资料的分析与解释[C]. 地壳构造与地壳应力文集8, 1996. 103~ 113.
[4] Mizuta Y, et al. Three dimension stress determination by hydraulic fracturing for underground excavation design. Int. J. Rock Mech. Min. Sci. &Geomech. Abstr. 1987. 24, 115~129.
http://www.sciencedirect.com/science/article/pii/0148906287912289 [5] 陈群策, 安美建, 李方全.水压致裂法三维地应力测量的理论探讨[J].地质力学学报, 1998.4 (1):37~43. http://journal.geomech.ac.cn/ch/reader/view_abstract.aspx?flag=1&file_no=19980106&journal_id=dzlxxb
[6] 郭良, 冷鸿斌, 李宏, 等. 测定岩体原地承载力的水力阶撑测试技术及其应用研究[J]. 岩土力学, Vol. 24增刊2, 471~ 474, 2003.
http://kns.cnki.net/KCMS/detail/detail.aspx?filename=YTLX2003S2112&dbname=CJFD&dbcode=CJFQ [7] 郭良, 丁立丰, 张志国, 等. 压力洞室围岩的高压透水率测试技术与应用研究[J]. 岩石力学与工程学报, Vol. 24, No. 2, 230~235, 2005.
http://lib.cqvip.com/qk/81668X/200001/11672891.html [8] 水利水电工程钻孔压水试验规程[S]. 北京: 水利电力出版社, 2003.
[9] 谷兆祺.挪威水电工程经验介绍[M].泰比亚出版公司, 1985, 12.
[10] 王汇明, 张辅纲, 等. 抽水蓄能电站砼衬砌高压隧洞工程地质条件探讨[J]. 广东水利水电, 增刊, 8~14, 2006.
http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=gdslsd2006z1004 -
图(4)
表(4)
计量
- 文章访问数: 225
- PDF下载数: 2
- 施引文献: 0