Study on Water Absorption and Saturation Coefficient of Sintered Brick with Electrolytic Manganese Slag
-
摘要:
以电解锰渣为主要原料制备电解锰渣烧结砖,研究了烧结温度、烧结时间、Ca添加量、Si添加量对烧结砖吸水率和饱和系数的影响。结果表明:烧结砖吸水率、饱和系数随烧结温度、烧结时间的增加呈下降的趋势;烧结砖吸水率、饱和系数随Ca添加量的增加呈上升的趋势;烧结砖吸水率、饱和系数随Si添加量的增加呈先降后升的趋势。电解锰渣烧结砖制备的较佳工艺条件:烧结温度为850℃,烧结时间为2.5 h,Ca添加量为0,Si添加量为24%。此时,电解锰渣免烧砖的吸水率为15.81%,饱和系数为1.03,性能较好。
Abstract:Effects of sintering temperature, sintering time, amount of Ca and Si on water absorption and saturation coefficient of sintered brick were studied. Results showed that: With the increase of sintering temperature and time, the water absorption and saturation coefficient of sintered brick decreased. With the increase of the amount of Ca, the water absorption and saturation coefficient of sintered brick increased. With the increase of Si content, the water absorption and saturation coefficient of sintered brick decreased first and then increased. Optimum technological conditions for the preparation of electrolytic manganese slag sintered brick were: the sintering temperature was 850℃, the sintering time was 2.5 h, the amount of Ca added was 0, and the amount of Si added was 24%. At this time, the water absorption rate and saturation coefficient of the electrolytic manganese slag fired free brick were 15.81% and 1.03, respectively, and the performance was better.
-
Key words:
- Electrolytic manganese slag /
- Fired brick /
- Water absorption /
- Saturation coefficient
-
-
表 1 预处理后电解锰渣主要化学成分/%
Table 1. Main chemical composition of electrolytic manganese slag after pretreatment
SiO2 CaO Al2O3 Fe2O3 SO3 MnO MgO 28.76 17.59 9.84 12.11 23.02 3.91 0.97 -
[1] 周代军, 吴芳, 施强. 锰渣的基本特性及在混凝土中的研究进展[J]. 混凝土, 2012(2):63-65. doi: 10.3969/j.issn.1002-3550.2012.02.019
ZHOU D J, WU F, SHI Q. Research progress on basic properties of manganese slag and its application in concrete[J]. Concrete, 2012(2):63-65. doi: 10.3969/j.issn.1002-3550.2012.02.019
[2] 杨远平, 龙小东, 何柳群. 电解金属锰渣CCD 逆流洗涤工艺研究及可行性分析[J]. 矿产综合利用, 2020(4):163-166. doi: 10.3969/j.issn.1000-6532.2020.04.028
YANG Y P, LONG X D, HE L Q. Study on CCD countercurrent washing process of electrolytic manganese slag and its feasibility analysis[J]. Multipurpose Utilization of Mineral Resources, 2020(4):163-166. doi: 10.3969/j.issn.1000-6532.2020.04.028
[3] 陈红亮. 电解锰渣中锰稳定化与氨氮控制的方法研究[D]. 重庆: 重庆大学, 2016.
CHEN H L. Study on methods of manganese stabilization and ammonia nitrogen control in electrolytic manganese residue [D]. Chongqing: Chongqing University, 2016.
[4] 吴霜, 王家伟, 刘利, 等. 电解锰渣综合利用评述[J]. 无机盐工业, 2016, 48(4):22-25.
WU S, WANG J W, LIU L, et al. Review on comprehensive utilization of electrolytic manganese slag[J]. Inorganic Salt Industry, 2016, 48(4):22-25.
[5] 何欢聚, 季淑娟. 基于专利信息的电解锰渣资源化利用[J]. 矿产综合利用, 2019, 6(6):7-12.
HE H J, JI S J. Study on resource utilization of electrolytic manganese slag based on patent informationg[J]. Multipurpose Utilization of Mineral Resources, 2019, 6(6):7-12.
[6] Chen P, Wang Z J, Liu R J. Experimental study on concrete of manganese slag in di erent dosage[J]. Concrete, 2010(2):71-73.
[7] Gohain T, Barbora A C, Deka A. Effect of manganese on growth, yield and quality of tea [Camellia sinensis L. (O) Kuntez][J]. Research on Crops, 2000:91-97.
[8] 冯云, 陈延信, 刘飞, 等. 电解锰渣用于水泥缓凝剂的生产研究[J]. 现代化工, 2006, 26(2):57-60. doi: 10.3321/j.issn:0253-4320.2006.02.016
FENG Y, CHEN Y X, LIU F, et al. Research on the application of electrolytic manganese slag in the production of cement retarder[J]. Modern Chemical Industry, 2006, 26(2):57-60. doi: 10.3321/j.issn:0253-4320.2006.02.016
[9] 张金龙, 彭兵, 柴立元, 等. 电解锰渣-页岩-粉煤灰烧结砖的砖制[J]. 环境科学与技术, 2011, 34(1):144-147.
ZHANG J L, PENG B, CHAI L Y, et al. Brick manufacture of electrolytic manganese slag-shale-fly ash sintered brick[J]. Environmental Science and Technology, 2011, 34(1):144-147.
[10] 庞泳喻, 肖远祥, 郭宇, 等. 电解锰渣掺量及烧结温度对烧结砖试样的物理性能影响[J]. 砖瓦, 2016(3):10-13. doi: 10.3969/j.issn.1001-6945.2016.03.003
PANG Y Y, XIAO Y X, GUO Y, et al. Effect of electrolytic manganese slag content and sintering temperature on physical properties of sintered brick samples[J]. Brick & Tile, 2016(3):10-13. doi: 10.3969/j.issn.1001-6945.2016.03.003
-