摘要:
为了研究矿石进入球磨机前的加工工艺对矿石可磨性的影响,以秘鲁某磁铁矿矿石为对象,进行Bond球磨功指数和相对可磨度试验.结果表明,在目标粒度106 μm、74 μm和45 μm下,高压辊磨产品的Bond球磨功指数均比颚式破碎机产品低.而预磁选精矿的Bond球磨功指数则比高压辊磨产品都高,甚至高于颚式破碎机产品.球磨机选型时Bond球磨功指数的测定,须根据矿石进入球磨机前的处理工艺而定.在磨矿细度为-74 μm 80%时,高压辊磨产品相对于颚式破碎机产品的相对可磨度为0.90,高压辊磨产品相对于预选精矿的相对可磨度为1.23.入磨前颚式破碎机破碎、高压辊磨破碎、高压辊磨加预磁选3种不同的处理工艺会导致后续矿石可磨性不同.
Abstract:
Taking a Peru magnetite ore as the sample,experiments of relative grind-ability and bond work index of ball mill were conducted in order to evaluate the effect of the technology and equipment of the operation ahead of the grinding operation on subsequent grinding performance of ore.The results showed that when the target size of 106,74 and 45μm,the Bond work index of HPGR products was lower than that of the jaw crusher,but the Bond work index of pre-separating concentrates was higher than that of HPGR products,even higher than the jaw crusher products.When Bond ball mill work index was used to mill determine,the effect of the technology and equipment of the operation ahead of the grinding operation should be considered.With regrinding fineness of-74 μm 80%,the rel ative grind-ability of HPGR and JC product reached 0.90,the relative grind-ability of HPGR and pre-separating concentrates reached 1.23.The technology and equipment of jaw crusher,HPGR,and HPGR with pre-separating ahead of grinding,would lead to different performance of Ore.
下载: