-
摘要:
烧结是钢铁行业污染物排放最多的工序，随着人们对环境质量的要求越来越高，在对烧结其他污染物加强管控的背景下，铁矿粉烧结排放CO的问题被广泛关注，CO减排势在必行。烧结烟气CO减排高效的治理技术比较匮乏，不能满足钢铁行业烧结机CO减排的要求。本文主要对国内外烧结烟气CO减排技术的研究现状进行总结，分析了烧结过程产生CO的机理，从源头、过程控制以及末端治理三方面协同控制CO减排。
Abstract:Sintering is the process that emits the most pollutants in the iron and steel industry. As people have higher and higher requirements for environmental quality, under the background of strengthening the control of other pollutants in sintering, the issue of CO emissions from sintering of iron ore powder has been widely concerned. CO emission reduction is imperative. The efficient treatment technology for CO emission reduction in sintered flue gas is relatively scarce and cannot meet the CO reduction of sintering machines in the steel industry. This article mainly summarizes the research status and trends of CO emission reduction technology in sintering flue gas at home and abroad, analyzes the mechanism of CO production during sintering process, and discusses CO emission reduction from the three aspects of source, process and end governance.
-
Key words:
- Sintered flue gas /
- CO reduction /
- Cooperative control
-
-
[1] 李洪涛. 环境空气中CO对健康的影响[J]. 科技资讯, 2017, 15(8): 132-134.
LI H T. Effects of CO in ambient air on health. Science & Technology Information, 2017, 15(8): 132-134.
[2] Liu C, Yin P, Chen R, et al. Ambient carbon monoxide and cardiovascular mortality: a nationwide time-series analysis in 272 cities in China[J]. Planetary-health, 2018(2):12-18.
[3] 傅菊英, 姜涛, 朱德庆. 烧结球团学[M]. 长沙: 中南工业大学出版社, 1996: 27-53.
FU J Y, JIANG T, ZHU D Q. Sintered pellets [M]. Changsha: Central South University of Technology Press, 1996: 27-53.
[4] 李权辉. 固体燃料对唐钢烧结过程的影响研究[D]. 唐山: 河北联合大学, 2014.
LI Q H. Research on Influence of solid fuel on sintering process of Tanggang [D]. Tangshan: Hebei United University, 2014.
[5] Nobuyuki Oyama, Yuji Iwami, Tetsuya Yamamoto, et al. Development of secondary-fuel injection technology for energy reduction in the iron ore sintering process[J]. ISIJ International, 2011, 51(6):913-921. doi: 10.2355/isijinternational.51.913
[6] 周浩宇, 李奎文, 雷建伏, 等. 烧结燃气顶吹关键装备技术的研究与应用[J]. 烧结球团, 2018, 43(4):23-26.
ZHOU H Y, LI K W, LEI J F, et al. Research and application of key equipment technology of sintering gas top blowing[J]. Sintering Pellets, 2018, 43(4):23-26.
[7] Molitor B, Richter H, Martin M E, et al. Carbon recovery by fermentation of CO-rich off gases-turning steel mills into biorefineries[J]. Bioresource technology, 2016, 215:386-396. doi: 10.1016/j.biortech.2016.03.094
[8] Loo C E. Role of Coke Size in Sintering of a Hematite Ore Blend[J]. Ironmaking and Steelmaking, 1991, 18(1):33.
[9] 鲁健. 烧结烟气特点及处理技术的发展趋势[J]. 内蒙古科技大学学报, 2012, 31(3):227-230. doi: 10.3969/j.issn.2095-2295.2012.03.006
LU J. Characteristics of sintering flue gas and development trend of treatment technology[J]. Journal of Inner Mongolia University of Science and Technology, 2012, 31(3):227-230. doi: 10.3969/j.issn.2095-2295.2012.03.006
[10] 闫伯骏, 邢奕, 路培, 等. 钢铁行业烧结烟气多污染物协同净化技术研究进展[J]. 工程科学学报, 2018, 40(7):767-775.
YAN B J, XING Y, LU P, et al. Research progress of collaborative purification technology of multi-pollutants in sintering flue gas of steel industry[J]. Journal of Engineering Science, 2018, 40(7):767-775.
[11] 孙小跃, 梁宝瑞, 童震松. 烧结烟气脱硫剂性能的研究[J]. 环境工程学报, 2010, 4(10):2293-2295.
SUN X Y, LIANG B R, TONG Z S. Study on performance of sintering flue gas desulfurizer[J]. Chinese Journal of Environmental Engineering, 2010, 4(10):2293-2295.
[12] 欧大明, 孙骐, 沈红标, 等. 焦粉粒度对铁矿石烧结过程的影响[J]. 钢铁, 2008, 43(10):8-12.
OU D M, SUN Q, SHEN H B, et al. Effect of coke particle size on iron ore sintering process[J]. Iron and Steel, 2008, 43(10):8-12.
[13] 裴元东, 廖继勇, 张俊杰, 等. 铁矿粉烧结过程CO减排探讨[J]. 烧结球团, 2019, 44(1):69-73.
PEI Y D, LIAO J Y, ZHANG J J, et al. Discussion on CO emission reduction in sintering process of iron ore powder[J]. Sintering Pellets, 2019, 44(1):69-73.
[14] 刘臣. SO2/NOx/COx在铁矿石烟气循环烧结过程中的行为研究[D]. 长沙: 中南大学, 2013.
LIU C. Study on the behavior of SO2/NOx/ COX in the process of iron ore flue gas cyclic sintering [D]. Changsha: Central South University, 2013.
[15] 潘文, 赵民革, 张志东, 等. 烧结高温烟气循环工艺提质减排机理研究[J]. 烧结球团, 2018, 43(4):59-63.
PAN WEN, ZHAO M G, ZHANG Z D, et al. Study on the mechanism of quality improvement and emission reduction in sintering high temperature flue gas circulation process[J]. Sintering Pellets, 2018, 43(4):59-63.
[16] 李乾, 李国, 殷国富, 等. 中天钢铁550 m2烧结机降低CO排放研究及实践[J]. 烧结球团, 2019, 44(4):70-7.
LI Q, LI G, YIN G F, et al. Research and practice on CO emission reduction in Zhongtian 550 m2 sintering machine[J]. Sintering Pellets, 2019, 44(4):70-7.
[17] 袁兵, 马洛文, 王跃飞, 等. 宝钢烧结固体燃料粒度控制探索与实践[J]. 烧结球团, 2010, 35(1):44-47.
YUAN B, MA L W, WANG Y F, et al. Exploration and practice of particle size control of sintered solid fuel in Baosteel[J]. Sintering Pellets, 2010, 35(1):44-47.
[18] 潘建. 铁矿烧结烟气减量排放基础理论与工艺研究[D]. 长沙: 中南大学, 2007.
PAN J. Research on basic theory and technology of sintering flue gas reduction emission in iron mine [D]. Changsha: Central South University, 2007.
[19] 白璐, 管景. 单原子铂催化剂的制备及其低温催化氧化一氧化碳[J]. 化学教育(中英文), 2019, 40(10):39-42.
BAI L, GUAN J. Preparation of monatomic platinum catalyst and its low temperature catalytic oxidation of carbon monoxide[J]. Chinese Journal of Chemical Education, 2019, 40(10):39-42.
[20] 张维东, 陆晓飞, 周伟莉, 等. 介孔铁硅复合氧化物负载金对一氧化碳的低温催化氧化[J]. 科学通报, 2014(26):2615-2620.
ZHANG W D, LU X F, ZHOU W L, et al. Catalytic oxidation of carbon monoxide at low temperature by gold supported mesoporous Fe-Si composite oxide[J]. Chinese Science Bulletin, 2014(26):2615-2620.
-
下载:
图(1)
计量
- 文章访问数: 2366
- PDF下载数: 112
- 施引文献: 0